PEEK (Polyether Ether Ketone) is a high-performance thermoplastic known for its exceptional mechanical, thermal, and chemical properties. It can withstand extreme temperatures, up to 260°C, without losing its strength and dimensional stability, making it ideal for demanding environments. PEEK also offers excellent resistance to wear, abrasion, and chemicals, including acids, bases, and organic solvents.
Key Applications:
Aerospace & Automotive: Used in engine components, bearings, and seals due to its high temperature and chemical resistance.
Medical: Utilized for implants and surgical instruments because of its biocompatibility and sterilization resistance.
Industrial & Oil/Gas: Applied in gears, pumps, and seals where mechanical strength and chemical resistance are essential.
Electronics: Used in connectors, insulators, and cable insulation due to its electrical insulating properties and heat resistance.

Polyeterimid (PEI), ofte kjent under handelsnavnet ULTEM™, er en høyytelses termoplast kjent for sin eksepsjonelle termiske stabilitet, mekaniske styrke og flammebestandighet. PEI tåler kontinuerlig bruk i temperaturer opp til 170°C, noe som gir utmerket dimensjonsstabilitet og lav termisk ekspansjon. Den tilbyr også suveren kjemisk motstand og elektriske isolasjonsegenskaper, noe som gjør den ideell for utfordrende miljøer.

PEI er mye brukt i romfart, bilindustri, elektronikk og medisinsk utstyr, hvor høy styrke, flammehemming og langsiktig ytelse er avgjørende. Bruksområder inkluderer elektriske kontakter, flyinteriør, motorkomponenter og steriliserbart medisinsk utstyr.

ULTEM™-materialer, som ULTEM™ 1000 og ULTEM™ 3000, er spesielt utviklet for ekstreme miljøer, og gir uovertruffen sikkerhet og pålitelighet for industrier med høy innsats

Polyetherimide (PEI), often known by the trade name ULTEM™, is a high-performance thermoplastic renowned for its exceptional thermal stability, mechanical strength, and flame resistance. PEI can withstand continuous use in temperatures up to 170°C, providing excellent dimensional stability and low thermal expansion. It also offers superb chemical resistance and electrical insulation properties, making it ideal for challenging environments.

PEI is widely used in aerospace, automotive, electronics, and medical devices, where high strength, flame retardancy, and long-term performance are crucial. Applications include electrical connectors, aircraft interiors, engine components, and sterilizable medical equipment.

ULTEM™ materials, such as ULTEM™ 1000 and ULTEM™ 3000, are specifically designed for extreme environments, providing unmatched safety and reliability for high-stakes industries.

Polieteroimid (PEI), często znany pod nazwą handlową ULTEM™, to wysokowydajny termoplast, znany ze swojej wyjątkowej stabilności termicznej, wytrzymałości mechanicznej i odporności na płomienie. PEI wytrzymuje ciągłe użytkowanie w temperaturach do 170°C, zapewniając doskonałą stabilność wymiarową i niską rozszerzalność cieplną. Materiał ten zapewnia również doskonałą odporność chemiczną i właściwości izolacji elektrycznej, dzięki czemu doskonale sprawdza się w trudnych warunkach.

PEI jest szeroko stosowany w przemyśle lotniczym, motoryzacyjnym, elektronicznym i medycznym, gdzie kluczowe znaczenie mają wysoka wytrzymałość, ognioodporność i długotrwała wydajność. Zastosowania obejmują złącza elektryczne, wnętrza samolotów, elementy silników i sterylizowalny sprzęt medyczny.

Materiały ULTEM™, takie jak ULTEM™ 1000 i ULTEM™ 3000, są specjalnie zaprojektowane do pracy w ekstremalnych warunkach, zapewniając niezrównane bezpieczeństwo i niezawodność w branżach o wysokich stawkach

Polyimide (PI) is a high-performance polymer known for its excellent thermal stability, mechanical strength, and chemical resistance. It can withstand extreme temperatures, typically up to 260°C, without losing its mechanical properties. PI also has low outgassing and high dielectric strength, making it an ideal material for demanding electrical and thermal insulation applications.

Key Applications:
-Electronics and Aerospace: Used in flexible printed circuits, insulation for wiring, and high-temperature adhesives.
-Automotive: Employed in engine components and electrical insulation due to its heat resistance.
-ndustrial: Suitable for seals, gaskets, and wear-resistant parts in high-temperature environments.
PI provides a robust solution for industries requiring reliability and performance under harsh conditions

Polyimide (PI) is a high-performance polymer known for its excellent thermal stability, mechanical strength, and chemical resistance. It can withstand extreme temperatures, typically up to 260°C, without losing its mechanical properties. PI also has low outgassing and high dielectric strength, making it an ideal material for demanding electrical and thermal insulation applications.

Key Applications:
-Electronics and Aerospace: Used in flexible printed circuits, insulation for wiring, and high-temperature adhesives.
-Automotive: Employed in engine components and electrical insulation due to its heat resistance.
-ndustrial: Suitable for seals, gaskets, and wear-resistant parts in high-temperature environments.
PI provides a robust solution for industries requiring reliability and performance under harsh conditions

Poliimid (PI) to polimer o wysokiej wydajności, znany ze swojej doskonałej stabilności termicznej, wytrzymałości mechanicznej i odporności chemicznej. Materiał ten wytrzymuje ekstremalne temperatury, sięgające zazwyczaj 260°C, nie tracąc przy tym swoich właściwości mechanicznych. PI charakteryzuje się także niskim poziomem odgazowywania i wysoką wytrzymałością dielektryczną, co czyni go idealnym materiałem do wymagających zastosowań w izolacji elektrycznej i termicznej.

Główne zastosowania: - Elektronika i przemysł lotniczy: stosowany w elastycznych obwodach drukowanych, izolacji przewodów i klejach wysokotemperaturowych.
- Motoryzacja: stosowany w elementach silników i izolacji elektrycznej ze względu na odporność cieplną.
-industrial: Nadaje się do uszczelnień, podkładek i części odpornych na zużycie w środowiskach o wysokiej temperaturze.
PI zapewnia solidne rozwiązanie dla branż wymagających niezawodności i wydajności w trudnych warunkach

Polyimide (PI) is a high-performance polymer known for its excellent thermal stability, mechanical strength, and chemical resistance. It can withstand extreme temperatures, typically up to 260°C, without losing its mechanical properties. PI also has low outgassing and high dielectric strength, making it an ideal material for demanding electrical and thermal insulation applications.

Key Applications:
-Electronics and Aerospace: Used in flexible printed circuits, insulation for wiring, and high-temperature adhesives.
-Automotive: Employed in engine components and electrical insulation due to its heat resistance.
-ndustrial: Suitable for seals, gaskets, and wear-resistant parts in high-temperature environments.
PI provides a robust solution for industries requiring reliability and performance under harsh conditions

Polyimide (PI) is a high-performance polymer known for its excellent thermal stability, mechanical strength, and chemical resistance. It can withstand extreme temperatures, typically up to 260°C, without losing its mechanical properties. PI also has low outgassing and high dielectric strength, making it an ideal material for demanding electrical and thermal insulation applications.

Key Applications:
-Electronics and Aerospace: Used in flexible printed circuits, insulation for wiring, and high-temperature adhesives.
-Automotive: Employed in engine components and electrical insulation due to its heat resistance.
-ndustrial: Suitable for seals, gaskets, and wear-resistant parts in high-temperature environments.
PI provides a robust solution for industries requiring reliability and performance under harsh conditions

Acrylonitrile Butadiene Styrene (ABS) is a thermoplastic polymer known for its high impact resistance, toughness, and excellent machinability. It offers good dimensional stability and resistance to chemicals, making it ideal for both engineering and consumer products. ABS is widely used in automotive parts, electronics housings, piping systems, and consumer goods like toys due to its ease of molding and durability. Its balance of strength and flexibility makes it a preferred material for applications requiring lightweight, high-performance plastics

Acrylonitrile Butadiene Styrene (ABS) is a thermoplastic polymer known for its high impact resistance, toughness, and excellent machinability. It offers good dimensional stability and resistance to chemicals, making it ideal for both engineering and consumer products. ABS is widely used in automotive parts, electronics housings, piping systems, and consumer goods like toys due to its ease of molding and durability. Its balance of strength and flexibility makes it a preferred material for applications requiring lightweight, high-performance plastics

Acrylonitrile Butadiene Styrene (ABS) is a thermoplastic polymer known for its high impact resistance, toughness, and excellent machinability. It offers good dimensional stability and resistance to chemicals, making it ideal for both engineering and consumer products. ABS is widely used in automotive parts, electronics housings, piping systems, and consumer goods like toys due to its ease of molding and durability. Its balance of strength and flexibility makes it a preferred material for applications requiring lightweight, high-performance plastics